Sitescan (Vertiv) integration with DCE & Netbotz static IP

[DCIM_Support]

This question was originally posted on DCIM Support by Victor Juarez Velazquez on 2019-03-12

---

1. Our customer wants to integrate NetBotz and wireless sensors with their own SNMP Monitoring system environment.
   1. Netbotz & static IP: ¿Is there any additional consideration in order to configure Netbotz network settings with static IP?
   2. Is there any special consideration to send traps from Netbotz to their own SNMP monitoring environment?
2. Currently, they are monitoring cooling equipment (Modbus protocol) though SiteScan (Vertiv). customer is willing to maintain sitescan operation
   1. Do you know feasibility to integrate Sitescan into DCE?
      https://www.vertiv.com/en-us/products-catalog/monitoring-control-and-management/software/liebert-sit...
   2. If possible, whatt should be considered.
      
      

(CID:140713370)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Ed Tarento on 2019-03-13

---

Hi Victor

I understand:

1a All NetBotz appliances can be configured with static IP addresses

1b NetBotz appliances (all models I think) can be configured to send traps (and maybe V3 informs?) to 

2a&b What do you mean by "integrate" (sorry didn't have time to follow the link).  You can send traps from DCE in 2 different ways.  A) easy but limited flexibility Network Management System Integration or B) lots of flexibility but more admin, traps for each alarm type https://sxwhelpcenter.ecostruxureit.com/pages/releaseview.action?pageId=92078503

Cheers

Ed

(CID:140713518)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.