This question was originally posted on DCIM Support by Shoaib Maqsood on 2019-08-30
Hello Team,
I have installed the Eltek Rectifier. DCE do not add the rectifier. IP setting of Rectifier is ok.
I have add the Rectifier in dce with SNMP V1 Or SNMP v3. But resuit is same
Regards,.
shoaib
(CID:148344415)
This answer was originally posted on DCIM Support by spezialist on 2019-08-30
Dear Shoaib Maqsood,
It seems to me that a similar topic Eltek Smartpack2 DDF can help you a lot. Please read Ara Orujyan answer on this:
...I tied to configure SNMP v3, and it works.
I don't know why this device have such specific configuration in part of SNMP V1 & V2, but with SNMP v3 it works perfect.
I hope this is what you need.
(CID:148344495)
This comment was originally posted on DCIM Support by spezialist on 2019-09-22
Dear Shoaib Maqsood,
Please tell us, were you able to solve your question or not?
With respect.
(CID:148771890)
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!