Private Lan2 on virtual DCE

[sesa369561_FSR]

Hello DCIM support team,

A new DCE virtual machine was created with 2 network adapters but it is not visible in the network settings screen.

When I tried to enable the private adapter in the console an error message appears.

What else I may to do to get the LAN2 (private) to show up?

thanks a lot for your support

Regards

Luis Lopez // SE FSR from CR

[tjlaw · Accepted solution]

Hi, 

"...other host 78:2B:CB:0D:55:4C already uses address 192.168.1.1". Maybe you want to remove this host (78:2B:CB:0D:55:4C) or change the IP address for this host to avoid IP conflict. DCE Private LAN uses 192.168.1.1 by default. 

BR, 

TJ