EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-02 04:44 PM
This question was originally posted on DCIM Support by Pierre Magdi on 2015-10-25
Please I need to know the length of the A-link cable that comes with and connects the NetBotz Rack Sensor Pod 150 to NetBotz Rack Monitor 570 ?
Thanks
(CID:103585848)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-02 04:44 PM
This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2015-10-25
Dear Pierre,
You can use CAT-5 (or equivalent) Ethernet patch cables to cascade or connect the Sensor Pod with a Nebotz 550 or 570. CAT-5 cable or A-Link cable is not supplied with the appliance. Please do not use crossover cables. The maximum combined length of all A-Link cables must not exceed 1000 m (3,280 ft).
You can cascade up to a combined total of twelve NetBotz Rack
Sensor Pod 150s (NBPD0150) with a NetBotz 550 or NetBotz 570.
Please refer NetBotz 570 Installation Manual for more info. Please let us know if there is any query.
I hope this helps.
Regards,
Bala
(CID:103585859)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-02 04:44 PM . Last Modified: 2023-10-31 11:28 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.