This question was originally posted on DCIM Support by John Smith on 2019-10-08
I was looking to get a NMC Card with Modbus RTU like the AP9635 however I believe the PX100 does not like using this extra card in the Smart Slot. Can someone confirm that?
If that is the case, is there a compatible NMC with Modbus RTU connections? If not, I will have to fall back to Modbus TCP.
This comment was originally posted on DCIM Support by spezialist on 2019-11-03
Dear John Smith,
Please tell us, were you able to solve your question or not?
This comment was originally posted on DCIM Support by John Smith on 2019-11-05
No, I have not answered it yet. According to a compatibility matrix i found, it should work. But it appears the AP9635 re flashed with the sy3p v6.5.0 firmware does not allow the card to be programmed by the front display.
This comment was originally posted on DCIM Support by John Smith on 2019-11-08
...does not allow the AP9635 card to have it's IP information changed or viewed by the front display.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!