This question was originally posted on DCIM Support by Islam Fouad Elkholy on 2019-10-28
I have number of Rack Pdus (AP8853,AP8886) connected with the feature Network Port Sharing..
In the user guide it shows that the pdu group connected together have to be the same firmware and 10 meters max. between the first pdu to the last one for the cabling.
I would like to know
1) If these two Pdu Part numbers are in the same family so its no technically any proplem connecting both of them using the feature of the network port sharing ?
2) the 10 meters rule is a very important restriction and should not exceed this meters?
3) for the DCE server the 4 PDU group will be showed and added as a 1 node (as the master IP is also the IP of others) or each Pdu will be added as a node also. ?
(CID:151060666)
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Valentin Kozlov on 2019-10-29
Hi!
(CID:151060873)
This answer was originally posted on DCIM Support by Valentin Kozlov on 2019-10-29
Hi!
(CID:151060873)
This comment was originally posted on DCIM Support by Islam Fouad Elkholy on 2019-10-29
i'm so thankful Valentin
(CID:151060905)
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!