Hi,
I have upgraded a 750 to 5.2.2 however i now cannot access it through web browser to enable SNMP to add it to DCE keep getting error 503. I have tried all ways to reset to default settings but unable see response ls comand shows ddf.zip ?? i am currently on site and this is my last task. any solutions would be helpfull as cant leave till added......
TIA
Mike
Solved! Go to Solution.
Hi @Mike-Sutton ,
This error is usually due to the device having an old (original?) version of firmware and not being reset to defaults after upgrade. From the version you currently have onward, this should not be necessary but the I suggest resetting to defaults and reconfiguring it :
http://www.apc.com/us/en/faqs/FA370681
Thanks,
Steve
Hi @Mike-Sutton ,
This error is usually due to the device having an old (original?) version of firmware and not being reset to defaults after upgrade. From the version you currently have onward, this should not be necessary but the I suggest resetting to defaults and reconfiguring it :
http://www.apc.com/us/en/faqs/FA370681
Thanks,
Steve
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!