Netbotz 455 - Supported USB connections

[DCIM_Support]

This question was originally posted on DCIM Support by Law TJ on 2019-06-24

---

Dear All, 

I would like to know if the following setup is supported by Netbotz 455: 

1. 3 Camera pod 160
2. 1 GSM Modem 

What I can find in kb FA256261 is maximum 3 USB camera supported but it doesn't state if additional 1 GSM modem would work? 

Best Regards, 

TJ

(CID:145851184)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-06-24

---

Hi TJ,

Any maximum connection of a single sensor does not effect the number of potential connections of other USB devices, although it may slow down communications if you're maxed out. If a device supports 4 cameras, then it will always support those 4 cameras regardless of what other USB connections are made (of course you'll need a powered USB hub).

Please note that no new modems have been tested in some time and the k-base that notes the supported modems should be current:

http://www.apc.com/us/en/faqs/FA158359

Thanks,

Steve

(CID:145851250)

[DCIM_Support]

This comment was originally posted on DCIM Support by Law TJ on 2019-06-25

---

Hi Steve, 

Thanks for the prompt reply 

BR, 

TJ 

(CID:145851781)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.