The attached screen shot shows a DCE thick client set in french, but with Netbotz 250 sensors displayed into it english. How can I have the Netbotz 250 sensors translated into french ?
Have you logged into the Netbotz with the advanced view configuration software? Select Region - The language selections are there...
Apologies for the delay in responding.
This lack of uniformity or consistency in translation is because localization support was dropped after DCE version 7.5. Elements that were introduced after DCE 7.5 may not have translations.
This is on our radar and we are working to prioritize.
Hi Jackie! It is a big issue for my region too. Please involve me if you need quick and proper translation. I'm very interested to have NB and DCE interfaces in Russian - without mistakes and errors. Thanks. Andrey
The Netbotz 250 is based off of the APC network management card 2, not Botzware, and is not supported in Advanced View. All configuration is done directly on the web interface, other than initial setup, which may require console access.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!