This question was originally posted on DCIM Support by Stine Hansen on 2018-12-06
Asking on behalf of Brian:
I went to do a password reset and I think the reset button is stuck. I have tried several times to get it unstuck with a paper clip as suggested but it still only boots up to the same spot every time. Can you please give me some advice if possible. It is still under warranty I believe.
This is about where it locks up:
MPC8248 Clock Configuration
- Bus-to-Core Mult 3x, VCO Div 4, 60x Bus Freq 16-50 , Core Freq 50-150
- dfbrg 0, corecnf 0x10, busdf 3, cpmdf 1, plldf 0, pllmf 3
- vco_out 400000000, scc_clk 100000000, brg_clk 100000000
- cpu_clk 300000000, cpm_clk 200000000, bus_clk 100000000
- pci_clk 33333333
CPU: MPC8248 (HiP7 Rev 14, Mask 1.0 1K50M) at 300 MHz
DRAM: 128 MB
FLASH: 64 MB
This answer was originally posted on DCIM Support by spezialist on 2018-12-09
It seems to me, that the best solution to this problem for the device under warranty is to contact the local =SE= techsupport. I would do that first.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!