Metered Rack PDU: Internal power supply #1 fault

[DCIM_Support]

This question was originally posted on DCIM Support by Shaik Mahboob Ali on 2018-10-24

---

Hi Team,

This was first time i have seen this alert from a PDU. Kindly let us know why this is causing it and solution for it.

(CID:134688429)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Garry Priestland on 2018-10-24

---

This is one of the more common failure modes for the Rack PDU's.  The PDU is faulty and needs replacement if you want to remove the fault.

Eventually the secondary supply will fail and you will lose monitoring capabilities on the PDU.

Regards

(CID:134688437)

[DCIM_Support]

This comment was originally posted on DCIM Support by Shaik Mahboob Ali on 2018-10-24

---

Thanks for your quick reply

(CID:134688483)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.