This question was originally posted on DCIM Support by Andrew Stoakes on 2018-09-13
For some reason i am no longer able to put devices in to or out of Maintenance mode. When i right click and select "Exit Maintenance mode" there is a pop up that appears for a very brief period then disappears before I can read it and the device remains in Maintenance mode.
Solved! Go to Solution.
This answer was originally posted on DCIM Support by spezialist on 2018-09-13
Dear Andrew Stoakes,
From my own experience I will say, that in this case it is necessary firstly simply to restart the PC on which you run the DCE-client (especially it is required for MS Windows 8 and above, as in these OS's the normal shutdown mode is replaced by the hibernation mode). Or at least it is required to make an logoff and logon the user on the Windows PC.
If this does not help (although it should), then you will need to reboot your DCE-server. Tell us please, what is your version of DCE software and what is the uptime of your DCE-server (see web-link http://_DCE_Address_/nbc/status/Status)?
Important: do you make regular backups of your DCE-server?
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!