This question was originally posted on DCIM Support by Boris on 2019-07-21
We got the flowing errors a lot of time in day .
We have raised the timeout and others value too .
In additional I upload the log file from dcserver.logo .
This comment was originally posted on DCIM Support by Greg Sterling on 2019-07-29
Hello Boris. Was this issue resolved?
This comment was originally posted on DCIM Support by Boris on 2019-07-30
Unfortunately the problem didn't solve
This comment was originally posted on DCIM Support by Marcis Randa on 2019-07-31
Greg Sterling Can you please help Boris if possible? Thank you
This answer was originally posted on DCIM Support by Greg Sterling on 2019-08-01
Boris. I assume "testing" to the DCE server from the DCO server works?
You noted you increased the timeout values in the below screen. Is 600 seconds the maximum value you've used?
If yes, please increase this value to something much greater, like 1800 seconds. I'm going to direct email you some instructions for setting some debug information on the DCE server so we can see if DCE will tell us how long the query from dce is actually taking.
Also, if the query from DCE is taking a while, over 600 seconds for example, then you may want to consider increasing the polling time settings in the top portion of this panel. If DCO is polling DCE for device and power data every 5 mins (300 seconds) as stated in your screenshot but DCE is taking over 10 mins (600 seconds) to respond, then DCO is repeatedly asking for data from DCE faster than it can provide a response.
Looks for an email from me shortly.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!