Installing AP9520TH

[DCIM_Support]

This question was originally posted on DCIM Support by JAVIER APONTE on 2019-05-23

---

I need to install 12 AP9520TH, through 01 NBRK0250 

Could you please tell me if that is feasible? 

If so, what accessories are required for this?

(CID:143760544)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Justine Chester on 2019-05-23

---

Hi Javier,

Good day!

The maximum number of AP9520TH that can be added to the Netbotz 250 is eight (8).

These sensors are cascaded using Cat5 cables through the A-link ports with terminators on both ends of the line (A-link IN of the Netbotz 250 and A-link out of the 8th AP9520TH) to avoid communication loss. 

To know more about this, please refer to page 10 of the Netbotz Rack Monitor 250 Installation and Configuration Guide from the Documentation section of this website.

I hope this helps.

Regards,

Justine

(CID:143760730)

[DCIM_Support]

This comment was originally posted on DCIM Support by JAVIER APONTE on 2019-05-23

---

Thanks Justine

(CID:144310769)

[DCIM_Support]

This comment was originally posted on DCIM Support by Justine Chester on 2019-05-23

---

You're welcome 

(CID:144310857)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.