Install DCO on Linux

[DCIM_Support]

This question was originally posted on DCIM Support by Boris on 2019-05-02

---

Hello

I'm going to install DCO 8.2.7 on Linux RedHat 7.5(min install)

According to the following link  I didn’t find the Linux lib .

Can you send me link to lib prerequisite before installation

(CID:143264741)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Jef Faridi on 2019-05-02

---

Hi Boris,

Please see the following page:

https://sxwhelpcenter.ecostruxureit.com/display/UADCO8x/Installing+DCO+on+Red+Hat+Enterprise+Linux+7

and by way, the latest DCO release is 8.3.

Kind regards 

(CID:143264775)

[DCIM_Support]

This comment was originally posted on DCIM Support by Jef Faridi on 2019-05-03

---

Hi Boris,

I think in general Linux libs usually modified/updated so it is not practical (from DCO development point of view) being documented. You might want to try with  RHEL server (probably not with minimum install but a "full" server install) with access to RHEL packages (preferably by using an active RHEL subscription). Then during dco installation (as application), installer should be able to download and install what ever is needed.

Kind regards 

(CID:143754969)

[DCIM_Support]

This answer was originally posted on DCIM Support by Boris on 2019-05-02

---

Hello Jef

Many thanks . This link I did see and know.

My question regarding the the Linux libs  that I need to install before run the DCO installation

(CID:143755876)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.