Hi Team
I wish to add Wall Mounted Indoor Air Conditioning Units inside a Server Room on ITA v9.x.x. However the issue I am having is mounting them such that they are not on the floor. How can I change the height from the Floor so that on the 3D model they can show to be mounted on the wall but a couple of meters from the Floor.
HI!
Unfortunately, DCO and ITA does not support wall mounted equipment.
All types of equipment can be mounted only on the floor or into the rack.
Hi Tafadzwa,
Unfortunately that is not supported - for the time being it is not supported to model wall mounted equipment.
As a sort of work-around you might want to use a floor mounted cooling unit (and make a note in its Properties that the equipment is wall-mounted). Or perhaps use a couple of Vertical Grilles (one for "Airflow direction: Into the room" and one for "Airflow direction: Out of the room", this is to balance the airflow), they are wall-mounted items.
Kind regards,
Jef
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!