This question was originally posted on DCIM Support by Victor Juarez Velazquez on 2020-01-23
2. Is there any way to link the Inrow communcication card to DNP3 protocol ?.
3. Have you tested a gateway such as FieldServer to joint both of them ?
This answer was originally posted on DCIM Support by Steven Marchetti on 2020-01-23
Neither the DCE nor the InRow units use the DNP3 protocol. I've searched the web and there do appear to be some protocol converters available for DNP3 to modbus. I can't speak to the specifics as I've never dealt with DNP3 but perhaps others on this forum can provide a more hands-on, detailed suggestion.
This answer was originally posted on DCIM Support by Glenn Martin on 2020-01-24
DDFs for DCE7 have been developed in the past for Fieldserver devices over SNMP, though I couldn't say for sure whether any of those Fieldserver devices were translating from DNP3 protocol.
You may find results for Fieldserver if you search at ddf.ecostruxure.com, however, these are bespoke DDFs intended for a particular customer's configuration and will probably not work for your device. Your best option is to start a new request directly.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!