This question was originally posted on DCIM Support by erpehrson on 2017-08-16
This answer was originally posted on DCIM Support by Steven Marchetti on 2017-08-16
Take a look at the video in k-base FA177081.
It should give you all you need on the DCE side.
This comment was originally posted on DCIM Support by erpehrson on 2017-08-16
I looked at the video and found some new stuff like unchecking the Tap Registration box and I removed the transfer settings. I also did a global search for the IP address in the entire data base. Nothing I have tried seems to be working. The end user says there are no duplicate IP addresses in use. I reconfigured the port access to match CBS network Port 80 SNMP V1. I can Ping the network card but cannot Telnet into it.
Do you have any other suggestions
This comment was originally posted on DCIM Support by Steven Marchetti on 2017-08-16
Check out this kbase:
It may help in troubleshooting your issue.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!