This question was originally posted on DCIM Support by Zeke Moreno on 2018-07-17
This answer was originally posted on DCIM Support by John Benedict Tayao on 2018-07-18
You can reference the link below on how to configure an IP on a Netbotz appliance.
Can you confirm what devices you are planning to add/configure on the Netbotz?
This answer was originally posted on DCIM Support by Zeke Moreno on 2018-07-24
Thank you very much for your answer and reference link. It was helpful info. To answer your question. We are using Flood, Temp, and Humidity sensors on the Netbotz 455. Sorry for the delay response.
This comment was originally posted on DCIM Support by John Benedict Tayao on 2018-07-25
If you are referring the Flood sensor as the Leak Rope sensor, it is not compatible with the Netbotz 455 (Room monitor). Below link is the compatibility matrix for Netbotz.
Hope this helps.
This comment was originally posted on DCIM Support by Zeke Moreno on 2018-07-26
Thank you, for the heads up! I was not aware of that.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!