How do i generate consolidated reports watts and Kilowatts power

[DCIM_Support]

This question was originally posted on DCIM Support by Shaik Mahboob Ali on 2018-08-12

---

Hi Members,

I have virtual sensors of Total Power Watts & Total Power Kilowatts, so i want to have  a new virtual sensor of both  total values.Kindly advise solution for this to have a consolidated report.

(CID:133370187)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by spezialist on 2018-08-12

---

Dear Shaik Mahboob Ali,

From your question:

...so i want to have  a new virtual sensor of both  total values.

As far as I know, unfortunately this is not possible in the current version of DCE-7.x.

I can only recommend you to use the Feature requests option here on the EcoStruxure IT. And it is possible in the future version of DCE-8.x this feature will be implemented.

With respect.

P.S.: from my own experience: I had the same problem, so I just started using virtual sensors with only one unit of measure, for example, kW. To do this, I needed to supplement several DDF-files with the appropriate sensors to bring all my devices to a common unit of measure.

(CID:133370211)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.