How do I upload a new SSL cert (not self signed) to a PDU?

[DCIM_Support]

This question was originally posted on DCIM Support by Krista Flynn on 2019-03-20

---

I need to upload a new SSL cert to the PDU's (AP8941 and AP7911B) so they are not using a self signed cert.  Do I need to generate a CSR on the PDU and if so, how do I do this?  

(CID:141265077)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Valentin Kozlov on 2019-03-20

---

Hi Krista!

You can generate CSR using APC Security Wizard software.

It's available on apc.com web site/

https://www.apc.com/shop/my/en/products/APC-Network-Management-Card-Security-Wizard-v1-0-4/P-SFNMCSE...

(CID:141265129)

[DCIM_Support]

This comment was originally posted on DCIM Support by Krista Flynn on 2019-03-20

---

Thanks for the link.  I generated the CSR and also had a cert created but the software seems to hang at about 50% when I try to import it in the wizard.  Have you ever seen that before?  

(CID:141265202)

[DCIM_Support]

This comment was originally posted on DCIM Support by Valentin Kozlov on 2019-03-21

---

No, I'm not 😞

(CID:141265375)

[DCIM_Support]

This comment was originally posted on DCIM Support by Krista Flynn on 2019-03-26

---

I'm still troubleshooting the issue but appreciate the help in getting to this point.

(CID:141267244)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.