GNOME correction request for Oracle Sun Rack II PDUS

[DCIM_Support]

This question was originally posted on DCIM Support by BJ Muckian on 2019-05-16

---

For Struxureware version Version: 8.2.7-77203-e6c65c

How can we request a technical properties correction on "GNOME" for the listed devices:

Oracle Sun Rack II Power distribution Unit (RMII) (7078658) & Dual Feed (7078659).

Three Phase PDUS

Power ports on the PDUs on Schnieder GNOME - power phase selections available = shared phases - ie. L1-L2, L2-L3, or L3-L1. Where in actuality the PDU ports are grouped for one of the 3 power Phases single phase -either L1, L2, or L3 - no phase combinations.

Phase 1  for single source fed PDU p/n 7078658 is Group 0 ports

Phase 2  for single source fed PDU p/n 7078658 is Group 1 ports

Phase 3 for single source fed PDU p/n 7078658 is Group 2 ports

Phase 1  for dual source fed PDU p/n 7078659 is Group 0, 3 ports

 Phase 2  for dual source fed PDU p/n 7078659 is Group 1, 4 ports

 Phase 3  for dual source fed PDU p/n 7078659 is Group 2, 5 ports

Brian Muckian

Senior Analyst

Data Center Operations

1-779-231-6587 (work)

(815) 790-6329 ( cell )

(CID:143758796)

[DCIM_Support]

This answer was originally posted on DCIM Support by Bartlomiej Orlowski on 2019-05-22

---

Hi Brian,

Thank you for your input.

I recommend you update the setup with the latest Genomes package that might solve your needs with a Genome introduced in September 2018: Oracle RMII 15kVA-3 LV PDU.

Here you can find information about available update packages and changes introduced for each release, how to get access to the packages and how to apply them in DCO: https://sxwhelpcenter.ecostruxureit.com/display/download/Genome+Library

Best regards,
Bartek Orlowski, Software developer

(CID:143760461)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.