This question was originally posted on DCIM Support by Mashwiz on 2019-05-10
I have one of my suppliers to whom I need a fuel level sensor.
However I have never implemented this before and need help before I can ship the correct sensor.
I am assuming I shall use the NBES0305 cable to connect it to the NetBotz.
Kindly look through the attached sensor specification and advise if this is can work fine with this cable.
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Mike Stacey on 2019-05-10
I am afraid I don't see an attachment on the question. In regards to 3rd party sensors you can use either 0-5v or 4-20mA sensors just dependent upon what the specific sensor calls for. If the fuel sensor is 0-5v then there is no reason that it can not be configured to work with the cable you listed.
Please feel free to email me the data sheet for the sensor firstname.lastname@example.org and I would be happy to look it over.
This comment was originally posted on DCIM Support by Mashwiz on 2019-05-10
Thank you, please check your email as requested.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!