For netbotz 250 how many pods i can casdcade

[DCIM_Support]

This question was originally posted on DCIM Support by mark keserwany on 2019-08-22

---

Hi,

Kindly can someone tell me how many PODs 150 I can cascade on the 250 and after which number I need to add a power supply AP9505i ?

Thank you All

(CID:148342174)

[DCIM_Support]

This answer was originally posted on DCIM Support by Gianluca Bertuletti on 2019-08-22

---

Hi

https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=JLER-A4CL7S_R4_EN.p...

page 10 of manual

(CID:148342232)

[DCIM_Support]

This answer was originally posted on DCIM Support by mark keserwany on 2019-08-22

---

Thank you for response, i ended up reading that after posting my question but my doubt is still about the power supply since it is mentioned u can add one but it is not clear if it is mandatory

(CID:148342235)

[DCIM_Support]

This comment was originally posted on DCIM Support by Balaraman Jagadeesan on 2019-08-22

---

Dear Mark,

I noticed the following information in the Netbotz Compatibility matrix. 

requiring one AP9505i power supply for every fourth pod

https://www.schneider-electric.com/en/download/document/APC_JHIN-7PTK7P_EN/

(CID:148342282)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Gianluca Bertuletti on 2019-08-22

---

hi

usually i add a power supply if i have more than 8 pods

(CID:148342240)

[DCIM_Support]

This comment was originally posted on DCIM Support by mark keserwany on 2019-08-22

---

Thank you for that information

(CID:148342244)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.