This question was originally posted on DCIM Support by scott.sexton on 2017-08-30
I'm in the process of moving my DCE & DCO servers into a firewall zone to allow future struxureon access. To do this I need to know exactly what incoming and outgoing ports are required for Netbotz, DCE & DCO?
The link above details which protocols and ports are needed however if does not tell me if the ports are incoming, outgoing or bidirectional.
Thanks in advance.
Solved! Go to Solution.
This answer was originally posted on DCIM Support by John Thompson on 2017-08-30
The FAQs for NetBotz and DCE may help you.
For most of the ports, they would be bi-directional. I will let someone else clarify for DCO.
This comment was originally posted on DCIM Support by Greg Sterling on 2017-08-30
Reposting John's previous comment below. DCO firewall rules are here:
This comment was originally posted on DCIM Support by John Thompson on 2017-08-30
DCO incoming and outgoing ports are here.
This comment was originally posted on DCIM Support by scott.sexton on 2017-09-01
Thank you both.
Are you able to help me a use case (example) for the following ports?
I don't believe my environment requires these ports to be opened. My environment is a physical DCE and virtual DCO.
This comment was originally posted on DCIM Support by John Thompson on 2017-09-01
Typically these ports would need to be opened if you were using external network storage for DCE or DCO. This could be on a Windows or NFS Share or a NAS/SAN drive.
Hope this helps to clarify.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!