Ecostruxure IT Gateway 1.9.3.0.1 software installed Windows Server/PC support with DCE - Private Network-GB2 port

[Venkat]

Dear team,

The Ecostruxure IT Gateway 1.9.3.0.1 software installed Windows Server/PC can support the devices already connected with DCE-GB2 private connected LAN devices?.

If so, please share the connectivity procedure with details.

Thanks & Regards,

K.Venkat.

[JLehr]

Hi @Venkat,

Your Gateway must have:

A public LAN to connect to EcoStruxure IT

A private LAN connected to the same subnet as the DCE private LAN

Have a look at this article in the EcoStruxure IT help center:

https://helpcenter.ecostruxureit.com/hc/en-us/articles/360015950337-Can-EcoStruxure-IT-Gateway-disco...

Best,

Jackie

[JonesNick]

EcoStruxure Gateway Appliance models EcoStruxure IT Gateway NUC ... Depending on the model, these ethernet ports are labelled LAN1 and LAN2 or Gb1 and Gb2. ... Connect the Gateway private network to the ethernet port labelled 2 (LAN2 or ... If the Gateway appliance is being deployed along with a DCE server or ...

[Greatt]

A server or a PC that is always on with: Microsoft® Windows® 10 64-bit, Server 2012 SP1, Server 2016, and Server 2019; Red Hat Enterprise ... After you install the Gateway, open a browser on any computer with network access to the ... is default), the Write community name (private is default), and the port, (161 is default).

[AkihiroY]

Hello,

 I assume that you are considering the DCE connector migration. If so, the following picture may be helpful for you to understand.