The Ecostruxure IT Gateway 18.104.22.168.1 software installed Windows Server/PC can support the devices already connected with DCE-GB2 private connected LAN devices?.
If so, please share the connectivity procedure with details.
Thanks & Regards,
Your Gateway must have:
A public LAN to connect to EcoStruxure IT
A private LAN connected to the same subnet as the DCE private LAN
Have a look at this article in the EcoStruxure IT help center:
EcoStruxure Gateway Appliance models EcoStruxure IT Gateway NUC ... Depending on the model, these ethernet ports are labelled LAN1 and LAN2 or Gb1 and Gb2. ... Connect the Gateway private network to the ethernet port labelled 2 (LAN2 or ... If the Gateway appliance is being deployed along with a DCE server or ...
A server or a PC that is always on with: Microsoft® Windows® 10 64-bit, Server 2012 SP1, Server 2016, and Server 2019; Red Hat Enterprise ... After you install the Gateway, open a browser on any computer with network access to the ... is default), the Write community name (private is default), and the port, (161 is default).
I assume that you are considering the DCE connector migration. If so, the following picture may be helpful for you to understand.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!