This question was originally posted on DCIM Support by Roberts Zemnieks on 2018-06-26
I am searching for information about connection third-party magnetic contact door sensor to NetBotz 200.
I have tried to connect it through Sensor ports, but without results for now. I am using FM-102 normally open magnetic door sensor with 2 wires.
Which pins should I use to connect it to NetBotz and is it even possible? Maybe someone can share their experience in this question?
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Steven Marchetti on 2018-06-26
Sorry, we can't provide the pinouts. The stock sensors for the NetBotz devices have additional wiring in them so that the system can auto-detect them. My suggestion would be that since these sensors are usually an on/off type of sensor, you can use your sensor in conjunction with the NetBotz Dry Contact Cable (NBES0304).
This comment was originally posted on DCIM Support by Roberts Zemnieks on 2018-06-26
Thank you for your quick response. I will try to find dry contact cable and see how it goes!
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!