DDF for EGX 150 GATEWAY - monitoring DCE

[DCIM_Support]

This question was originally posted on DCIM Support by Leonardo Suarez on 2019-08-31

---

Good day

I need to monitor the EGX150 someone help me with this information please, it is very important to monitor this GATEWAY with DCE I need to deliver a project and this communication is not yet.

PD: If I request the ddf file it takes a long time ...

I appreciate your prompt help.

(CID:148344517)

[DCIM_Support]

This comment was originally posted on DCIM Support by Cory McDonald on 2019-08-31

---

Leonardo,

The EGX150 is usually not directly monitored.  It is usually used only to convert information from an end device from Modbus to Modbus TCP.  The end-device will be what you want to look for a DDF for on https://ddf.ecostruxureit.com.

If it is not available on that site, you may wish to post a comment about what model the end-device is.

Kind Regards,

Cory

(CID:148344522)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-09-22

---

Dear Leonardo Suarez,

Please tell us, were you able to solve your question or not?

With respect.

(CID:148771888)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.