DDF deployment problem

[sesa426480_brid]

Hi Guys,

I got a critical problem when deploy the DDF to DCE. I need seek your help and I didn’t has wisdom and knowledge to solve it.

Highlight:

The DCE’s “DH2_Rm2113_RHT5_HATemp” display value is 67’C. and Honeywell controller value should be 23.56’C which same as SBO.  I discover that around 70% Bacnet point value was incorrect and has this problem also. The Modbus ID register was correct.

Please see the attachment is the AS screen capture and DDF file

[Jake_H]

This appears to be a custom DDF.  Do you know where it came from?  Can you ask the person who created it?