DDF File for "Schneider Electric E3SUPS30KH"

[DCIM_Support]

This question was originally posted on DCIM Support by Eva on 2019-03-16

---

Is anyone know where can download the DDF file for "Schneider Electric E3SUPS30KH"

(CID:140714628)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by spezialist on 2019-03-16

---

Dear Eva,

On a similar issue there are already several topics, for example:

• Can we monitor Easy UPS E3SUPS30KH by NBRK0570 or DCE?
• APC Easy UPS can configured with Data center expert ?

That is, as far as I understand, in order to monitor the new Easy UPS 3S series, you need to have:

• APC Easy UPS Online SNMP Card (APV9601);
• the corresponding DDF-file.

For starters, you can try without the above specified DDF-file. At the same time, the DCE-server will use the universal upsmib.xml DDF-file to monitor the above mentioned new UPS.

In any case, regarding the correct DDF-file, you better make a request on a special DDF resource.

If you have more questions, please ask.

With respect.

(CID:140714658)

[DCIM_Support]

This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2019-03-17

---

Dear Eva,

Easy UPS 3S E3SOPT001 UPS SNMP card part number is E3SOPT001. 

https://www.apc.com/shop/id/en/products/Easy-UPS-3-Series-Network-Card/P-E3SOPT001

EcoStruxure IT gateway already has the Easy UPS 3S device support. In order to monitor Easy UPS 3S on DCE software, You can request the DDF file from Device Support as Specialist mentioned. 

I hope this answers your query. 

Regards,

Bala

(CID:140714774)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.