DCO web client network cabling

[DCIM_Support]

This question was originally posted on DCIM Support by MANCINO Rocchino on 2019-02-20

---

Hello

back to this request...

I need to see my cabling in DCO web interface.

Tks a lot for your answer

Best regards

Rocchino

(CID:140218936)

[DCIM_Support]

This answer was originally posted on DCIM Support by Jef Faridi on 2019-02-20

---

Hi Rocchino,

Network cabling currently supported only in desktop client. I think adding more functionality to web client is part of the future plans. 

Kind regards

(CID:140219080)

[DCIM_Support]

This comment was originally posted on DCIM Support by MANCINO Rocchino on 2019-02-20

---

Hello Jeff

I have seen a post regarding the same question ...It was in 2017....
Since no evolution? sounds very bad...

(CID:140219090)

[DCIM_Support]

This comment was originally posted on DCIM Support by Niels Kjeldsen on 2019-02-21

---

Hi Rocchino

There has been a lot of development on the web client since 2017, unfortunately the network functionality has not been done yet. We are committed to continuously move more functionality to the web client, and the possibility to see and change network connections is very high on the list.

I can see that you have mentioned that you are interested in seeing the connections in the web client. If there are any other use cases that are important to you please let us know.

Best,

Niels

(CID:140219476)

[DCIM_Support]

This comment was originally posted on DCIM Support by MANCINO Rocchino on 2019-02-22

---

Hi Niels,

at now no new feature from me are requested.
We are planning to manage our last 3 Datacenter in China and USA with DCO/DCE. In Switzerland is already done. Since one year we use DCO for all cabling (copper, San Fiber, Network fiber, sfp etc) and DCO will be at the end THE master of the assets & cabling So for all our teams having all these informations via the web client will be better than an Excel file ...never up to date.

Best regards

Rocchino

(CID:140219887)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.