This question was originally posted on DCIM Support by Christopherus Laurentius on 2015-12-14
1.How do we model either a ceiling mount or wall mount cooling unit like FCU?
Those cooling units are not standing on the floor.
2.The 3D calculated modelling, how can we set to show calculation from either one of the cooling?
We have a customer where they are using a mix of cooling unit of InRow
and Daikin's VRV, air cooled cooling -which is wall mounted like sample picture below.
InRow is to provide cooling during day time, whereas VRV is for the evening.
-The Condenser unit (CU) is outside of the data center, typically on the roof.
-The Fan Coil Unit (FCU), is within the dc, either ceiling mounted or wall mounted
This answer was originally posted on DCIM Support by Valentin Kozlov on 2015-12-14
I think that you can try to model it with vertical grills on the walls.
But I have no idea how to split it in time 🙂
For 3D calculations you can disable (deactivate) InRow units for a while.
This comment was originally posted on DCIM Support by Christopherus Laurentius on 2015-12-16
Hi Valentin, Thanks for the suggestion. Will try that as alternative The actual unit is protruding out from the wall tough, so the 3D is not accurately representing that.
This comment was originally posted on DCIM Support by Boris Majdandzic on 2018-08-14
Hi, Have you managed to resolve the issue with FCU?
I have same problem with two electrical rooms.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!