This question was originally posted on DCIM Support by Stuart Welsby on 2018-05-18
We have an install of DCO 8.2.2 and wondered if anyone had successfully setup monitoring of the standard LINUX Build and Device Hardware, i.e. monitoring via a NMS and alerting for say a failed disk etc ?
Any advice on how to do this or best practices would be appreciated.
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Ed Tarento on 2018-05-18
Assuming you've installed on bare metal rather than a VM. Most major brand servers have hardware monitoring and many have out of band monitoring and admin access
The DCO SNMP agent is running but its configured to report only certain stats about the operation of DCO. Its this system that allows DCO (app, not OS or HW) monitoring via DCE
Post here if your hardware monitoring is sufficient. Otherwise I can explore additions without modifying the existing agent
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!