DCO Offline Demo vboxnet0 error

[DCIM_Support]

This question was originally posted on DCIM Support by Adeel Tahir on 2018-11-05

---

Hi, 

I am trying to run DCO offline demo after setting the Host only network IPV4 to 192.168.56.1 and subnet mask to 255.255.255.0

When I run the virtual machine, I get the error in snapshot. Any suggestions how to remove this error and run the virtual machine. 

(CID:134693599)

[DCIM_Support]

This answer was originally posted on DCIM Support by Ed Tarento on 2018-11-05

---

Hi Adeel

Check your VirtualBox (not VM) network settings.

Then make sure your VM network is properly configured 

Cheers

Ed

(CID:134693933)

[DCIM_Support]

This comment was originally posted on DCIM Support by Adeel Tahir on 2018-11-06

---

Hi Ed,

I have performed these steps, but I cant seem to get "vboxnet0" instead I get the option of "VirtualBox Host-Only Ethernet Adapter" and the error is still the same

(CID:134694011)

[DCIM_Support]

This comment was originally posted on DCIM Support by Ed Tarento on 2018-11-07

---

Adeel, I recommend you change your Virtual Box and VM configurations as shown.

Ed

(CID:134694711)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Adeel Tahir on 2018-11-07

---

It was a simple two step fix

1. I  removed old versions from C:\Users\VirtualBox VMs
2. enabled Intel Virtualization Technology VT-x  from BIOS and reloaded the Offline_827 file

The demo is working fine now.

(CID:134694766)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.