This question was originally posted on DCIM Support by Wes Burhoe on 2018-06-14
Good day all! When we enable the floor grid in DCO the default settings are close but slightly off according to ANSI/TIA-606-B labeling standards. The standard indicate data centers should start at "AA" instead of just "A" and the numbers also include a zero for the first 9 tiles... "01, 02,03...".
Not a huge deal as we know this is easily adjusted but wanted to try this method for getting feedback to the developers.
This answer was originally posted on DCIM Support by Jef Faridi on 2018-06-14
It seems this is already supported, if I right click on floor > Properties > Floor, and then define AA (as starting point for x-axis) and 01 (as starting point for y-axis):
then the floor coordinates would be displayed similar to your description:
hope this was what you were looking for?
This comment was originally posted on DCIM Support by Wes Burhoe on 2018-06-14
Hi Jef, Thanks... I was aware of this. Just testing this forum as a way to funnel feedback to you guys. More to come!
This comment was originally posted on DCIM Support by Jef Faridi on 2018-06-14
Okay, thanks 😀
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!