DCO Does not show Stulz air conditioning sensor

[DCIM_Support]

This question was originally posted on DCIM Support by Caroll Silva on 2019-01-17

---

In DCE if you can see the sensors of Unit return air temperature and Unit supply air temperature but when you want to associate in DCO, only the return air temperature sensor shows any idea so that it can be visualized in DCO.

regards

Caroll

(CID:138381745)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Jef Faridi on 2019-01-18

---

Hi Caroll,

That seems to be DDF related - new ddf(s) can be requested at DEvice Support site ( http://sxwhelpcenter.ecostruxureit.com/devices).

Kind regards

(CID:138806915)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.