This question was originally posted on DCIM Support by John Smith on 2018-05-01
How do I delete walls in DCO? We reconfigured out room and removed some walls. Do I have to completely rebuild my data center floor and all the racks?
I am unable to move the room partitions which were in the old layout.
This answer was originally posted on DCIM Support by Jef Faridi on 2018-05-02
I would try to use the Design tool to delete/modify the manually created walls and/or reshape the walls.
An example to delete a wall, Design mode enabled (highlighted with dashed circle) right click on a manually created wall and "Delete" (or modify):
Reshape/modify a wall: using the resize tool, click on a wall and then drag to left/right to move the wall:
And/or "Add Corner"and then reshape the wall:
Hope this helps,
This comment was originally posted on DCIM Support by John Smith on 2018-05-08
The wall you are referring too is an "interior" wall, right? The one highlighted blue in the first image?
I originally used an exterior wall, extended into the DC Floor. When I try that delete button, it prompts me if I want to delete the whole floor...
This comment was originally posted on DCIM Support by Jef Faridi on 2018-05-09
Yes, that was an "interior" wall (which had been created manually). (first illustration/image)
The "exterior" walls, which are not created manually, cannot be selected for delete, but can be reshaped (my last illustration/image).
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!