DCO 8.2.12 update

[DCIM_Support]

This question was originally posted on DCIM Support by Eitan Nachman on 2019-01-01

---

Hello, 

I tried to upgrade my DCO to 8.2.12 yesterday. But i couldn't complete the installation.

The installation stopped in the middle and this what i saw in the log:

o-1.8.19p2-14.el7_5.x86_64 193/445
Dec 31 15:24:29 ibldcopv01.weizmann.ac.il operations-upgrade[17807]: Updating : perl-IO-Socket-SSL-1.94-7.el7.noarch 194/445
Dec 31 15:24:29 ibldcopv01.weizmann.ac.il operations-upgrade[17808]: tar: ./sysstats/modules/samba/alarm: time stamp 2018-12-31 15:40:03 is 935.053805019 s in the future
Dec 31 15:24:29 ibldcopv01.weizmann.ac.il operations-upgrade[17809]: tar: ./sysstats/modules/snort/alarm: time stamp 2018-12-31 15:40:03 is 935.043574492 s in the future

(CID:137728706)

[DCIM_Support]

This comment was originally posted on DCIM Support by Roland Wolf on 2019-01-01

---

Hi

It looks like the system clock is incorrect.

I'm guessing that the system clock must have drifted out of sync since last install. Usually the machine is automatically synchronised with a time server. Can you check if this has been deactivated?

(CID:137728710)

[DCIM_Support]

This comment was originally posted on DCIM Support by Eitan Nachman on 2019-01-01

---

I checked the clock. It seems to be ok

(CID:137728732)

[DCIM_Support]

This comment was originally posted on DCIM Support by Gianluca Bertuletti on 2019-01-02

---

hi

from my side i'm having this issue

(CID:137728826)

[DCIM_Support]

This answer was originally posted on DCIM Support by Jef Faridi on 2019-01-02

---

Hi Eitan,

As Roland kindly mentioned it seems the system time is incorrect. I guess following options could be considered:

Correct the NTP settings via webmin, StruxureWare DC Operation > Setup

or manually correcting the time (not recommended, might result in unexpected system/data behavior)

if needed, a clean installation and then restoring the latest backup would be recommended, that may give you a reliable setup.

Kind regards

(CID:137728842)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Muhammad Asif Rehmat on 2019-01-04

---

The Best is to make a new server for DCO 8.2.12. Then take the backup from old dco server and restore it in new DCO 8.2.12. It works Perfect. I recently  done it like that . its easy and safe.

(CID:137729615)

[DCIM_Support]

This comment was originally posted on DCIM Support by Eitan Nachman on 2019-01-06

---

Thanks!

(CID:137729947)

[DCIM_Support]

This answer was originally posted on DCIM Support by Altair Engineering IT Systems on 2019-01-11

---

I did a clean install of 8.2.12, this works well.

Only issue is that I do not see the Restore option.

Anyone know where it is "hidden"? My menu looks like this:

thank you,

Karimi Igeria

(CID:137731761)

[DCIM_Support]

This comment was originally posted on DCIM Support by Jef Faridi on 2019-01-11

---

Hi Altair,

From 8.2.12, the backup/restore feature is moved to web client, Administration > Backup and Restore

Kind regards

(CID:137731774)

[DCIM_Support]

This comment was originally posted on DCIM Support by Altair Engineering IT Systems on 2019-01-11

---

Thank you, Jef. 

Have a nice day.

(CID:137731799)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.