DCO 8.1 - Utility source as top of power path?

[DCIM_Support]

This question was originally posted on DCIM Support by Andrew Trabert on 2017-06-07

---

I have a customer that has some non-critical server loads on a utility feed only, no UPS.  Is it possible to model this as the top of the power path or do you still have to model a UPS to get powerpath coloring and auto cabling?  if so, is this on the roadmap for a future release?

(CID:120131436)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Jef Faridi on 2017-06-07

---

Hi Andrew,

Yes, currently in 8.1 it is possible to model power path without UPS. For capacity calculations, make sure that the PDU has "Input breaker" configured, example:

Kind regards

(CID:120131514)

[DCIM_Support]

This comment was originally posted on DCIM Support by Andrew Trabert on 2017-06-07

---

Thanks Jef!  I thought it was added in 8.1, but couldn't find anything on specific on DCIM support about it...

(CID:120131567)

[DCIM_Support]

This comment was originally posted on DCIM Support by Jef Faridi on 2017-06-08

---

You are most welcome, Andrew

Kind regards

(CID:120131964)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.