This question was originally posted on DCIM Support by Balaraman Jagadeesan on 2017-09-09
Connect your laptop to the HP Server via direct local LAN connection by using the HP Server iLO ethernet port. You can find the iLO default IP address on the Server itself, and you can set the closest IP address on your laptop to make direct local connection.
You will be prompted to enter the iLO user name and password. By default, username: hpadmin password: hpinvent
You may contact the Server support if it varies.
Select the Console port as shown below.
Click on Virtual devices–Select the DCO 8.1 ISO image as shown below.
After you have successfully mounted the DCO ISO file, you can restart the server.
Click on the Power switch and select reset. And then follow the nominal installation procedure of DCO.
I hope this helps.
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!