This question was originally posted on DCIM Support by juice on 2018-02-20
Can you view the health of DCE Server via its client ?
Im only able to determine the hard disk size and utilization but the overal health i cannot get... any ideas?
This answer was originally posted on DCIM Support by Steven Marchetti on 2018-02-20
I know that product management is looking to add an enhancement of this type for the next generation product but I do not believe it is being actively looked at for DCE 7.x. There's currently no way to monitor much other than IPMI in the case of a hardware server or, if you're running a VM, you can monitor resource usage.
This comment was originally posted on DCIM Support by juice on 2018-02-21
Thank you to all that has responded, very much appreciated.
This is not exactly what i was hoping for. I thought that there was a "how to enable server health" option that we could get stats.
will do some more research and if i get new info will post.
This answer was originally posted on DCIM Support by Christopherus Laurentius on 2018-02-21
Ways I can think of:
Some commonly used OIDs for linux, taken from:
Network Interface Statistics
List NIC names: .22.214.171.124.126.96.36.199.1.2
Get Bytes IN: .188.8.131.52.184.108.40.206.1.10
Get Bytes IN for NIC 4: .220.127.116.11.18.104.22.168.1.10.4
Get Bytes OUT: .22.214.171.124.126.96.36.199.1.16
Get Bytes OUT for NIC 4: .188.8.131.52.184.108.40.206.1.16.4
1 minute Load: .220.127.116.11.4.1.2021.10.1.3.1
5 minute Load: .18.104.22.168.4.1.2021.10.1.3.2
15 minute Load: .22.214.171.124.4.1.2021.10.1.3.3
percentage of user CPU time: .126.96.36.199.4.1.2021.11.9.0
raw user cpu time: .188.8.131.52.4.1.2021.11.50.0
percentages of system CPU time: .184.108.40.206.4.1.2021.11.10.0
raw system cpu time: .220.127.116.11.4.1.2021.11.52.0
percentages of idle CPU time: .18.104.22.168.4.1.2021.11.11.0
raw idle cpu time: .22.214.171.124.4.1.2021.11.53.0
raw nice cpu time: .126.96.36.199.4.1.2021.11.51.0
Total Swap Size: .188.8.131.52.4.1.2021.4.3.0
Available Swap Space: .184.108.40.206.4.1.2021.4.4.0
Total RAM in machine: .220.127.116.11.4.1.2021.4.5.0
Total RAM used: .18.104.22.168.4.1.2021.4.6.0
Total RAM Free: .22.214.171.124.4.1.2021.4.11.0
Total RAM Shared: .126.96.36.199.4.1.2021.4.13.0
Total RAM Buffered: .188.8.131.52.4.1.2021.4.14.0
Total Cached Memory: .184.108.40.206.4.1.2021.4.15.0
Add the following line to snmpd.conf and restart:
includeAllDisks 10% for all partitions and disks
Path where the disk is mounted: .220.127.116.11.4.1.2021.9.1.2.1
Path of the device for the partition: .18.104.22.168.4.1.2021.9.1.3.1
Total size of the disk/partion (kBytes): .22.214.171.124.4.1.2021.9.1.6.1
Available space on the disk: .126.96.36.199.4.1.2021.9.1.7.1
Used space on the disk: .188.8.131.52.4.1.2021.9.1.8.1
Percentage of space used on disk: .184.108.40.206.4.1.2021.9.1.9.1
Percentage of inodes used on disk: .220.127.116.11.4.1.2021.9.1.10.1
System Uptime: .18.104.22.168.22.214.171.124.0
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!