DCE initial configuration

[DCIM_Support]

This question was originally posted on DCIM Support by sheep on 2018-11-27

---

After i finished successfully with the configuration of the network settings, and have an access to the web of the DCE server, is there any initial configuration i should make?

I tried to get into the client and it showed me this message: "The credentials you have entered are invalid for this StruxureWare Data Center Expert server."

Thanks in advance.

(CID:137104573)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by spezialist on 2018-11-27

---

Dear sheep,

As I wrote in your previous topic , the initial login/password in the DCE-client and web-GUI is apc/apc.

Now i need to relate the login to the active directory for the team of the company.

Except that, the system is ready to work? There's no other operations to do?

This is correct, change the default password for the user apc and you can assume, that the initial configuration is complete.

With respect.

(CID:137104619)

[DCIM_Support]

This comment was originally posted on DCIM Support by sheep on 2018-11-27

---

Yes you are totally right, i've entered apc/apc and it worked. missed this information.

Now i need to relate the login to the active directory for the team of the company.

Except that, the system is ready to work? There's no other operations to do?

(CID:137104616)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-11-27

---

Dear sheep,

See my answer below.

(CID:137104629)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.