DCE cannot bind LDAP

[DCIM_Support]

This question was originally posted on DCIM Support by Nikita Koloskov on 2018-08-28

---

Hello! I have message "Cannot bind to LDAP server at "************" with supplied DN and password"

and

Bad authentication connecting to LDAP server ldap://vdc1.matfmc.ru:389/ as CN=Ларин Александр,OU=Отдел внедрения ИС,OU=Дирекция ИТ,DC=matfmc,DC=ru

So i would like to ask if cyrillic symbols supported in this parameters?

(CID:134023472)

[DCIM_Support]

This comment was originally posted on DCIM Support by Nikita Koloskov on 2018-08-28

---

DCE version 7.5.0, virtualized

(CID:134023474)

[DCIM_Support]

This answer was originally posted on DCIM Support by Steven Marchetti on 2018-08-28

---

Hi Nikita,

I've heard of no issues with the character set you're using but I'll defer to anyone else that has used that in this application to verify. 

As for the authentication (assuming the characters are supported), you may want to check out the following k-base:

http://www.apc.com/us/en/faqs/index?page=content&id=FA158395

It has a good amount of info on how this should be set up. 

For instance, one tip notes that if there is a space in the name that you may want to enter it in quotes:

CN="Ларин Александр"

instead of

CN=Ларин Александр

Another issue could be protected users as noted in #6 on that document and we don't play well with them. You get an authentication error.

Thanks,

Steve

(CID:134023494)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-09-04

---

Dear Nikita Koloskov,

Tell us, please, have you solved this problem or not?

With respect.

(CID:134026444)

[DCIM_Support]

This comment was originally posted on DCIM Support by Nikita Koloskov on 2018-09-10

---

We will try your advise soon...

(CID:134029014)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-09-10

---

Ok, thanks for the feedback 😀.

(CID:134029018)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.