This question was originally posted on DCIM Support by Muhammad Genjua on 2018-10-18
can i configure DCE to receive traps from third party devices and show them in alarm window?
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2018-10-18
As far as I know, it is not possible to make DCE as SNMP Trap receiver for third party products.
In order to integrate third party devices and view the alarms, you need to submit a device support request for Device Definition File(DDF) creation if the third party devices support SNMP protocol. Based on DDF request with SNMP Walk file and Management Information Base(MIB) files, you can view the device sensors values and device alarms. It is also possible to create custom thresholds for the third party product sensor values so that you can also view the alarms when the threshold exceeds or value changes.
I hope this helps.
This comment was originally posted on DCIM Support by spezialist on 2018-10-18
Dear Muhammad Genjua,
By the way, once, almost a similar question, has already been asked here at EcoStruxure IT Help. See, for example, threads and .
If you have more questions, please ask.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!