DCE SNMP Community String Change Impact

[DCIM_Support]

This question was originally posted on DCIM Support by juice on 2019-08-26

---

Good day

Please assist, 

We are changing the Snmp settings however we need to know if the PDU will drop the current load - servers that are connect, would the servers connected to the PDU loose power ?

DCE  - 7.4.1.  PDU v3 AP7953 & AP7855A

Kind regards

(CID:148342945)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-08-26

---

Hi Juice,

Changing settings on the Network Management Card (NMC) may reboot the card itself but will not change the outlet states.

Thanks,

Steve

(CID:148342956)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.