DCE-7.7: Russian letters "с" and "я" are displayed incorrectly in the web GUI.

[DCIM_Support]

This question was originally posted on DCIM Support by spezialist on 2019-07-17

---

Dear support,

After installing the new version of DCE-7.7, I found a bug: the russian letters "с" and "я" are displayed incorrectly in the web-GUI:

I hope this bug will be fixed 😀.

Very thanks for the support.

(CID:147195989)

[DCIM_Support]

This comment was originally posted on DCIM Support by Andrey Ivashov on 2019-08-05

---

Hello, have you asked your local techsupport or opened a ticket @ Schneider Customer Care? If not yet, please apply to the Moscow one at ru.ccc@schneider-electric.com   and we will help you to escalate your issue. Thanks.

(CID:147201911)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-08-06

---

Dear Andrey Ivashov,

Thanks for the tip 😀.

Support case number: 61535898.

(CID:147202121)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-08-28

---

Dear Andrey Ivashov,

I inform you again: in the new release of DCE-7.7.1, which took place last week, there is a similar bug:

According to your recommendation, I created the corresponding support case  # 61535898 of August 6th. But so far I have not received a single answer.

Tell me please - is this normal?..

Very thanks for the support.

(CID:148343689)

[DCIM_Support]

This comment was originally posted on DCIM Support by Stine Hansen on 2019-08-28

---

Hi spezialist, thanks for posting!

I'll try to follow up on this.

Kind regards,

Stine

(CID:148343692)

[DCIM_Support]

This answer was originally posted on DCIM Support by Jackie Lehr on 2019-08-28

---

Hi spezialist,

I’ll follow up on this with engineering. Thanks for pointing it out.

Best,

Jackie

(CID:148343746)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-08-28

---

Ok, very thanks for the support.

(CID:148343794)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.