This question was originally posted on DCIM Support by Miguel Gonçalves on 2019-06-26
The dce was running without problems. We changed the ntp server configuration and time zone through the client. After saving the changes, a message appears to restart the server. After this process we never get access via web or client.
DCE 7.2.4 is running in vmware. In the vmware console we were able to verify that the DCE started without errors.
I am checking in the it manager if there has been any change in the network (domains, firewall, etc).
In attached i send some print screen.
I restart DCE and i can see that httpd service fail to start.
This comment was originally posted on DCIM Support by John Benedict Tayao on 2019-07-03
I would suggest to contact your local technical support to have this looked at. Seeing the error shows that the httpd service did not start correctly. Your local technical support should be able to assist you further on this issue.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!