43214members
217535posts

Cooling Configuration - Alarm

Highlighted
Ensign

Cooling Configuration - Alarm

Hi team,

 

One of our customer, we need to show the below DCIM Feature points for Cooling configuration.

 

We didn't find out the Alarms / recommended actions as follow up the below scenario. 

 

Ability to alarm cooling configuration issues and provide recommended actions. For example, a room has no perforated tiles for the Computer Room Air Conditioning (CRAC) unit airflow (one or more CRACs have been added to the floor but no perforated tiles have been added), or there is no perforated tile airflow (one or more perforated tiles have been added to the room but no CRACs have been provided to supply any airflow).

 

Kindly suggest us with screenshots to explain customer end.

 

Thanks & Regards,

 

K.Venkat.

Tags (1)
2 REPLIES 2
Highlighted
Lieutenant Lieutenant
Lieutenant

Re: Cooling Configuration - Alarm

Hi Venkat,

The notification concerning adding perforated tiles may be displayed if there should be modeled downflow CRACS in the room.

Modeling downflow CRACS requires raised floor and adding some perforated tiles.  To configure raised floor, right click on your room/data center > Properties > Floor , and then enable the 'Raised floor' option and define 'Floor height'.

 

In the following illustration I have only modeled a Downflow CRAC:

Capture_1.JPG

then I will go ahead and set the room/Floor properties:

Capture_2.JPG

and add Perforated Floor Tile(s):
Capture_3.JPG

 

Kind regards,

Jef

Tags (1)
Highlighted
Ensign

Re: Cooling Configuration - Alarm

Thanks Jef.

 

Simulated with customer exiting solution and got the same result.

 

Regards - K.Venkat

Tags (1)