Can my DCE 7.4.3 add devices responding with Modbus RTU? DCE works with Modbus RTU over IP?

[DCIM_Support]

This question was originally posted on DCIM Support by MARCOS FERNANDO VEIT on 2019-10-22

---

(CID:149787188)

[DCIM_Support]

This answer was originally posted on DCIM Support by spezialist on 2019-10-22

---

Dear MARCOS FERNANDO VEIT,

Of course this is possible: for this you need to use TCP/IP Modbus gateways, such as =SE= ConneXium TSXETG100, PowerLogic EGX100 or Link150 EGX150.

If you have more questions, please ask.

With respect.

(CID:149787217)

[DCIM_Support]

This comment was originally posted on DCIM Support by MARCOS FERNANDO VEIT on 2019-10-22

---

Tank´s

(CID:151060584)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-11-03

---

Dear MARCOS FERNANDO VEIT,

Please tell us, were you able to solve your question or not?

With respect.

(CID:151062311)

[DCIM_Support]

This comment was originally posted on DCIM Support by MARCOS FERNANDO VEIT on 2019-11-06

---

Yes. Tank You.

(CID:151063304)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-11-07

---

Ok, very thanks for the feedback. 

(CID:151063775)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.